STM8S003F3P6 MCU: Datasheet PDF, CAD Models, Features

Description

The STM8S003F3/K3 value line 8-bit microcontrollers offer 8 Kbytes of Flash program memory, plus integrated true data EEPROM. They are referred to as low-density devices in the STM8S microcontroller family reference manual (RM0016).

 

The STM8S003F3/K3 value line devices provide the following benefits: performance,robustness and reduced system cost.

 

Device performance and robustness are ensured by true data EEPROM supporting up to 100000 write/erase cycles, advanced core and peripherals made in a state-of-the-art technology at 16 MHz clock frequency, robust I/Os, independent watchdogs with separate clock source, and a clock security system.

CAD Models

 

Figure: PCB Symbol

 

 

Figure: Footprint

 

 

Figure: 3D Model

 

Block Diagram

 

Figure: Block Diagram

 

Features

Core

• 16 MHz advanced STM8 core with Harvard

architecture and 3-stage pipeline

• Extended instruction set

 

Memories

• Program memory: 8 Kbyte Flash memory; data retention 20 years at 55 °C after 100 cycles

• RAM: 1 Kbyte
• Data memory: 128 bytes true data EEPROM; endurance up to 100 k write/erase cycles

 

Clock, reset and supply management

• 2.95 V to 5.5 V operating voltage
• Flexible clock control, 4 master clock sources

– Low-power crystal resonator oscillator

– External clock input

– Internal, user-trimmable 16 MHz RC

– Internal low-power 128 kHz RC

• Clock security system with clock monitor
• Power management

– Low-power modes (wait, active-halt, halt)

– Switch-off peripheral clocks individually

– Permanently active, low-consumption power-on and power-down reset

 

Interrupt management

• Nested interrupt controller with 32 interrupts
• Up to 27 external interrupts on 6 vectors

 

Timers

• Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

• 16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)

• 8-bit basic timer with 8-bit prescaler
• Auto wakeup timer
• Window and independent watchdog timers

 

Communications interfaces

• UART with clock output for synchronous operation, SmartCard, IrDA, LIN master mode

• SPI interface up to 8 Mbit/s
• I2C interface up to 400 Kbit/s

 

Analog to digital converter (ADC)

• 10-bit ADC, ± 1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog

 

I/Os

• Up to 28 I/Os on a 32-pin package including 21 high-sink outputs

• Highly robust I/O design, immune against current injection

 

Development support

• Embedded single-wire interface module (SWIM) for fast on-chip programming and non-intrusive debugging

 

Datasheet

You can download the datasheet from the link given below.

STM8S003F3P6-Datasheet

 

Specifications

Product Attribute	Attribute Value
Manufacturer:	STMicroelectronics
Product Category:	8-bit Microcontrollers - MCU
Series:	STM8S003F3
Mounting Style:	SMD/SMT
Package / Case:	TSSOP-20
Core:	STM8
Program Memory Size:	8 kB
Data Bus Width:	8 bit
ADC Resolution:	10 bit
Maximum Clock Frequency:	16 MHz
Number of I/Os:	16 I/O
Data RAM Size:	1 kB
Operating Supply Voltage:	2.95 V to 5.5 V
Minimum Operating Temperature:	- 40 C
Maximum Operating Temperature:	+ 85 C
Packaging:	Tube
Brand:	STMicroelectronics
Data RAM Type:	RAM
Data ROM Size:	128 B
Data ROM Type:	EEPROM
Interface Type:	I2C, SPI, UART
Number of ADC Channels:	5 Channel
Number of Timers/Counters:	3 Timer
Processor Series:	STM8S
Product Type:	8-bit Microcontrollers - MCU
Program Memory Type:	Flash
Factory Pack Quantity:	1480
Subcategory:	Microcontrollers - MCU
Supply Voltage - Max:	5.5 V
Supply Voltage - Min:	2.95 V
Unit Weight:	0.007055 oz

 

Manufacturer

STMicroelectronics is a French-Italian multinational electronics and semiconductors manufacturer headquartered in Plan-les-Ouates near Geneva, Switzerland. The company resulted from the merger of two government-owned semiconductor companies in 1987: "Thomson Semiconducteurs" of France and "SGS Microelettronica" of Italy. It is commonly called "ST", and it is Europe's largest semiconductor chip maker based on revenue. While STMicroelectronics corporate headquarters and the headquarters for EMEA region are based in the Canton of Geneva, the holding company, STMicroelectronics N.V. is incorporated in the Netherlands.

 

Using Warning

Note: Please check their parameters and pin configuration before replacing them in your circuit.

 

FAQ

What is microcontroller and how it works?

Microcontrollers are embedded inside devices to control the actions and features of a product. Hence, they can also be referred to as embedded controllers. They run one specific program and are dedicated to a single task. They are low power devices with dedicated input devices and small LED or LCD display outputs.16 Aug 2018

 

What is the role of a microcontroller?

Microcontroller is a compressed micro computer manufactured to control the functions of embedded systems in office machines, robots, home appliances, motor vehicles, and a number of other gadgets.

 

Why microcontroller is used?

Microcontrollers are used in automatically controlled products and devices, such as automobile engine control systems, implantable medical devices, remote controls, office machines, appliances, power tools, toys and other embedded systems.