MC56F8356VFVE IC Chips: Datasheet, Features, Application

Description

The NXP MC56F8356VFVE is a digital signal processor and controller with the 56800E as its core, featuring high speed and real time, which is essentially information transformation and extraction. The MC56F8356VFVE has a flexible set of peripherals, which helps to provide a highly beneficial solution for many applications. This article details the CAD model, datasheet, specifications, etc. of the MC56F8356VFVE. If you are interested, you can read on.

CAD Model  

Feature: Symbol

Feature: 3D Model

Block diagram

Feature: Block diagram

System Bus Interfaces

Features: System Bus Interfaces

Features

• Up to 60 MIPS at 60MHz core frequency
• DSP and MCU functionality in a unified, C-efficient architecture
• Access up to 1MB of off-chip program and data memory
• Chip Select Logic for glueless interface to ROM and SRAM
• 256KB of Program Flash
• 4KB of Program RAM
• 8KB of Data Flash
• 16KB of Data RAM
• 16KB of Boot Flash
• Up to two 6-channel PWM modules
• Four 4-channel, 12-bit ADCs
• Temperature Sensor
• Up to two Quadrature Decoders
• Optional on-chip regulator
• FlexCAN module
• Two Serial Communication Interfaces (SCIs)
• Up to two Serial Peripheral Interfaces (SPIs)
• Up to four general-purpose Quad Timers
• Computer Operating Properly (COP) / Watchdog
• JTAG/Enhanced On-Chip Emulation (OnCE™) for unobtrusive, real-time debugging
• Up to 62 GPIO lines
• 144-pin LQFP Package

Applications

• Motion control
• Smart appliances
• Steppers, encoders
• Tachometers
• Limit switches
• Power supply andcontrol

Datasheet

MC56F8356VFVE Datasheet

Specifications

Manufacturer

Founded in 2006, NXP is one of the top 10 non-storage semiconductor companies in the world. NXP's products cover a wide range of products, including but not limited to mobile devices, industrial IoT, and smart cities. The company has industry-leading mobile multimedia solutions, with products ranging from high-end smartphones to ultra-low-cost handsets that contribute significantly to the performance level of mobile multimedia.

Advantages

8KB of data flash and 256KB of program flash are available on the MC56F8356VFVE. Its program flash has a page erase size of 1KB, and its data flash can be batch or page erased individually. Additionally, the MC56F8356VFVE features two quadrature decoders that can generate a number proportionate to the actual position proportional to the actual number and capture four transitions of a two-phase input.

MC56F8356VFVE Alternate

56F8156 and 56F8156 these two similar models have a lot in common, there are also some differences, the following comparison only a few points, please see the details of the datasheet. Both 56F8356 and 56F8156 use 56800E as the core. They integrate the functions of digital signal processor and microcontroller in a single chip. The 56F8356 and 56F8156 allow programs to be executed from internal or external memory, both of which have 256KB of program memory. However, 56F8356 includes two pulse-width modulation modules, whereas 56F8156 has only one.

Where to use MC56F8356VFVE

The MC56F8356VFVE is specified to operate over a temperature range from -40°C to 105°C and a reference supply voltage from 3V to 3.6V, which should ensure that the voltage and temperature of the application does not exceed its reference range. Due to its wide selection of temperature ranges, the MC56F8356VFVE is suitable for a variety of applications including but not limited to industrial control for power, lighting, and automation application, etc.

FAQ

What architecture is the MC56F8356VFVE core based on?

The 56800E core is based on a Harvard-style architecture consisting of three execution units and running.

How many PWM signals are included in the MC56F8356VFVE's Pulse Width Modulator module?

Three PWN signal output pairs are included. These PWN signal output pairs are complementary and can be programmed individually.

What interface types is the MC56F8356VFVE compatible with?

CAN, SCI, SPI