The TPS6122x family devices provide a power-supply solution for products powered by either a single-cell,two-cell, or three-cell alkaline, NiCd or NiMH, or one-cell Li-lon or Li-polymer battery. Possible output currents depend on the input-to-output voltage ratio. The boost converter is based on a hysteretic controller topology using synchronous rectification to obtain maximum efficiency at minimal quiescent currents. The output voltage of the adjustable version can be programmed by an external resistor divider, or is set internally to a fixed output voltage. The converter can be switched off by a featured enable pin. While being switched off, battery drain is minimized. The device is offered in a 6-pin SC-70 package (DCK) measuring 2 mm X 2 mm to enable small circuit layout size.
Figure: PCB Symbol
Figure: Footprint
Figure: 3D Model
Figure: Pin Configuration
Figure: Block Diagram
- Output Overvoltage
- Overtemperature
- Input Undervoltage Lockout
- 1 to 3 Cell Alkaline, NiCd or NiMH
- 1 cell Li-lon or Li-Primary
You can download the datasheet the link given below.
TYPE | DESCRIPTION |
Category | Integrated Circuits (ICs) |
Power Management (PMIC) | |
Voltage Regulators - DC DC Switching Regulators | |
Mfr | Texas Instruments |
Package | Tape & Reel (TR) |
Cut Tape (CT) | |
Digi-Reel | |
Product Status | Active |
Function | Step-Up |
Output Configuration | Positive |
Topology | Boost |
Output Type | Fixed |
Number of Outputs | 1 |
Voltage - Input (Min) | 0.7V |
Voltage - Input (Max) | 5.5V |
Voltage - Output (Min/Fixed) | 5V |
Voltage - Output (Max) | - |
Current - Output | 200mA (Switch) |
Frequency - Switching | Up to 2MHz |
Synchronous Rectifier | Yes |
Operating Temperature | -40℃ ~ 125℃ (TJ) |
Mounting Type | Surface Mount |
Package / Case | 6-TSSOP, SC-88, SOT-363 |
Supplier Device Package | SC-70-6 |
Base Product Number | TPS61222 |
Texas Instruments Incorporated (TI) is an American technology company headquartered in Dallas, Texas, that designs and manufactures semiconductors and various integrated circuits, which it sells to electronics designers and manufacturers globally. It is one of the top 10 semiconductor companies worldwide based on sales volume.The company's focus is on developing analog chips and embedded processors, which account for more than 80% of its revenue.TI also produces TI digital light processing technology and education technology products including calculators, microcontrollers and multi-core processors.
Note: Please check their parameters and pin configuration before replacing them in your circuit.
Switching regulators, by comparison, offer a significant improvement in conversion efficiency and, consequently, energy savings. Transistors are employed here as well, but instead of being used in a linear variable resistor mode, they are utilized in switched mode as switches that are either in the ON or OFF state.
A voltage regulator is a component of the power supply unit that ensures a steady constant voltage supply through all operational conditions. It regulates voltage during power fluctuations and variations in loads. It can regulate AC as well as DC voltages.
Although it has to be said that voltage regulators usually do control the current, i.e. they have a built-in current-limiting circuit, and they have a thermal shutdown circuit, and thus they don't normally get damaged by a short circuit on the output.