- Tel: 86-755-23941515
- Email: Sales@xida-electronics.com
The NC7SV125 is a single non−inverting 3−state buffer in tiny footprint packages. The device is designed to operate for VCC = 0.9 V to 3.6 V.
Figure: Symbol
Figure: PCB Footprints
Figure: 3D Model
Figure: Pin Diagram
Figure: Marking Diagram
You can download the datasheet the link given below.
| Product Attribute | Attribute Value |
| Manufacturer: | onsemi |
| Product Category: | Buffers & Line Drivers |
| Number of Input Lines: | 1 Input |
| Number of Output Lines: | 1 Output |
| Polarity: | Non-Inverting |
| High Level Output Current: | - 24 mA |
| Low Level Output Current: | 24 mA |
| Quiescent Current: | 900 nA |
| Supply Voltage - Max: | 3.6 V |
| Supply Voltage - Min: | 0.9 V |
| Operating Supply Current: | 50 mA |
| Minimum Operating Temperature: | - 40 ℃ |
| Maximum Operating Temperature: | + 85 ℃ |
| Mounting Style: | SMD/SMT |
| Package / Case: | SC-70-5 |
| Packaging: | Reel |
| Packaging: | Cut Tape |
| Packaging: | MouseReel |
| Brand: | onsemi / Fairchild |
| Function: | Buffer/Line Driver |
| Height: | 1 mm |
| Input Signal Type: | Single-Ended |
| Length: | 2 mm |
| Logic Family: | TinyLogic ULP |
| Logic Type: | CMOS |
| Number of Channels: | 1 Channel |
| Operating Supply Voltage: | 0.9 V to 3.6 V |
| Output Type: | 3-State |
| Product Type: | Buffers & Line Drivers |
| Propagation Delay Time: | 4.3 ns at 1.8 V, 2.8 ns at 2.5 V, 2.6 ns at 3.3 V |
| Series: | NC7SV125 |
| Factory Pack Quantity: | 3000 |
| Subcategory: | Logic ICs |
| Supply Current - Max: | 0.9 uA |
| Technology: | CMOS |
| Tradename: | TinyLogic |
| Width: | 1.25 mm |
| Part # Aliases: | NC7SV125P5X_NL |
| Unit Weight: | 0.000705 oz |
ON Semiconductor is an American semiconductor supplier company, formerly in the Fortune 500, but dropping into the Fortune 1000 (ranked 512) in 2020.Products include power and signal management, logic, discrete, and custom devices for automotive, communications, computing, consumer, industrial, LED lighting, medical, military/aerospace and power applications. ON Semiconductor runs a network of manufacturing facilities, sales offices and design centers in North America, Europe, and the Asia Pacific regions. Headquartered in Phoenix, Arizona, ON Semiconductor has revenues of $3.907 billion (2016),which puts it among the worldwide top 20 semiconductor sales leaders.
Note: Please check their parameters and pin configuration before replacing them in your circuit.
Buffers and line drivers are integrated circuit devices that isolate the input circuit from the output circuit. This reduces the load seen by the input circuit and enables signals to be sent on PCB or cables over longer distances with higher fan-out.
A buffer tends to be an interposed element which keeps the source from being affected by the load attributes, but delivers the same or nearly the same voltage and current it sees at its own input. A driver usually boosts the current source/sink level, or the voltage at which it delivers its output to its load.
0
